Novelty And Kwality

Hydraulic Seals, Hydraulic Seal, Polyurethane Seal, PU Seal, Seals, Oil Seals
Polyurethane Piston Seal
Polyurethane Rod Seal (Sellos de Vástago de Poliuretano)
Polyurethane Wiper Seal
Polyurethane Piston DAS Compact Seal
Polyurethane Chevron Packing Seal

Price varies with dimensions (Inner Diamater x Outer Diameter x Height) mm
Hydraulic Seals

"Looking For Business Partner Worldwide"

 

#oemsupplier #seals #hydraulicseals #sealingsolutions #cylinders #hydrauliccylinders #hydraulicrepair #hydraulicpress #earthmovingmachinery #earthmovingequipment #juntas #sellos

Additional Information:

• Production Capacity: 10000
• Delivery Time: READY OR 1-2 DAYS
• Packaging Details: 10 PCS SHRINK PACKAGING

Content:

• Seal Twistors Set
• Seal Digger
• Ultrasharp Cutter
• Blade for Ultrasharp
• OR Recogniser
• SEAL HOOK
• Piston Seal Constrictor
• Bore Tape 50-300mm
• Width and Depth groove caliper

Additional Information:

• Minimum Order Quantity: 1 SET

Description

• SEAL CLASPER can clasp PTFE piston seal back into the groove, it can works from OD50mm to 360mm.
• The stainless steel belt can be adjusted according to the dimension of seals, HPU triangle protector prevent the seal damaged by pressing.
• Simple way to operate and easy to do.

How to use

1. Adjust the length of stainless steel belt to match the seal2. Pull the grid to clasp PTFE piston seal back into groove3. It makes piston seal to be installed into cylinder safely and rapidly

Additional Information:

• Minimum Order Quantity: 1 Piece(s)

Content:

• Bore Tape 50-300mm
• OR Cement/ Adhesive
  
• OR Chopper
• Blade for OR Chopper
• OR Splicer
• Seal Heater 220V
• OR Grinder 220V
• Polisher of purple grit for grinder
• Polisher of wool for grinder

Additional Information:

• Minimum Order Quantity: 1 Piece

Piston Seal Constructor

Description

The installation of piston seal is rather difficult without a suitable tool, it’s easy to make the seal inflected, and damage the seal even if it’s the high quality one.
The piston seal constrictor can use for installation and constriction, it can impose the T shape clamp and cloth to make the process easily. After the installation, it can constrict the seal again and make it close to the metal groove more, let the shape recover, reduce the chance of problem caused during the usage consequently.

Product Instructions

How to use
1. After heating or soften the PTFE seal, use cloth tapes to bind the both side of the seal, and enter into the groove along the edge of the piston
2. After finishing the installation, use the cloth circle the seal, then use the constrictor to tighten it. It will take 3 to 5 minutes to reach the restoring effect
3. Red PU pad can fill the gap between the tape and the seal , avoiding leak during the restoring process.

Additional Information:

• Minimum Order Quantity: 1 Piece(s)

Description
1. Turn reamer after punch at beginning
2. Stop punching once the reamer get into
3. Punch back once the screw get deep enough
4. Taking the oil seal out without any damage on the groove parts successfully

Product Instructions

1. Turn reamer after punch at beginning.
2. Stop punching once the reamer get into
3. Punch back once the screw get deep enough
4. The oil seal has been took out successfully

Additional Information:

• Minimum Order Quantity: 1 Piece

ULTRA SHARP is a specialty cutter for resin fabric bearing strip (not include fragile material). The 4 screws on the cover can fine tuning the angle of the blade. It can make perfect kerf of 45 degree at once without any deflashing process.
The blade can be replaced by regular stationary blade. 1 blade can be used twice

Additional Information:

• Minimum Order Quantity: 1 Piece

Light-duty tools for removing O-Rings, 4 pieces per set with different hooks at two ends for different grooves.
Damage on the groove can be reduced.

Additional Information:

• Minimum Order Quantity: 1 Piece(s)

Description
Flip over to get inside diameter. Get accurate measurement for flexible object such as O-rings.

Additional Information:

• Minimum Order Quantity: 1 Piece

Description

PTFE piston seals installer.1. Put PTFE ring in a temperature controlled oven, heat it up to 120C. PTFE ring will be softened.2. Place the heated PTFE ring on a suitable position of STRETCHER then press firmly and smoothly.3. Lay the piston seal onto the groove of piston. Clasp it back into the metal groove by using SEAL CLASPER.4. Piston can be inserted in to cylinder easily and safely after constructing.

Additional Information:

• Minimum Order Quantity: 1 Piece